34.6 Device Range that Can Be Set
For details on the device range of controllers that can be
used on GT16 Handy, refer to the following manuals.
GT Designer3 Version1 Screen Design Manual
(Fundamentals)
GOT1000Series Connection Manual
(Non-Mitsubishi Products 1) for GT Works3
34.7 Precautions
Station number setting of the temperature
controller system
Make sure to establish temperature controller system
with No.1 station.
GOT clock control
Since the temperature controller does not have a clock
function, the settings of [time adjusting] or [Broadcast]
by GOT clock control will be disabled.
Disconnecting some of multiple connected
equipment
The GOT can disconnect some of multiple connected
equipment by setting GOT internal device. For
example, the faulty station where a communication
timeout error occurs can be disconnected from
connected equipment.
For details of the setting contents of GOT internal
device, refer to the following manual.
GT Designer3 Version1 Screen Design Manual
34. CONNECTION TO OMRON TEMPERATURE CONTROLLER
34.6 Device Range that Can Be Set
28
29
30
31
32
33
34
35
34 - 9