Data Storage Location - Mitsubishi Electric GT16 User Manual

15. DATA CONTROL
OS, project data (screen data) or alarm data which is written in the GOT, CF card or USB memory can be displayed, and
data can be transferred between GOT and CF card or USB memory.
The format of the CF card or USB memory is also possible.

15.1 Data Storage Location

15.1.1 Data type and the storage location

System
The data storage location and transferring (write/read) route for each data type are shown below.
Also, the data storage locations are shown below.
■ GOT main unit
OS Install
BootOS
Download
Project
data
A drive
(Standard CF card),
CF card
(when installed in GOT)
Item
BootOS
BootOS
Standard monitor OS
PLC communication driver
*1
OS
Extended function OS
Option OS
*1
Project data
Project
data (Including recipe setting, alarm conditions, time action, and GOT setup.)
*1 The USB memory can be used from Utility.
*2 When using the project data stored in the Standard CF Card (A drive) with the GOT, hold the CF card installed to the GOT.
For the USB memory, store the project data to the Standard CF Card (A drive) or Built-in flash memory (C drive).
C drive
(Built-in flash memory)
Upload OS BootOS
Project
data
E drive
(USB drive)
USB memory
(when installed in GOT)
Data type
16.3.2 Installing using the data control function (Utility)
BootOS
OS
Project
Write
data
Read
Project
data
Copy files on
Windows
Project
data
Inserting/Removing
CF card
(when installed
in PC)
Built in flash memory (C drive)
Standard CF card (A drive)
Built in flash memory (C drive)
*2
Standard CF card (A drive)
Built in flash memory (C drive)
*2
15. DATA CONTROL
15.1 Data Storage Location
PC
GT Designer3
Write
BootOS
Project
data+OS
USB memory
(when installed
in PC)
Storage location
15 - 1
9
10
11
12
13
14
15
16