Mitsubishi Electric GT16 User Manual page 286

(4) Copy operation
Folder to be used in logging is copied.
15 - 38
15. DATA CONTROL
15.2 Various Data Control
1.
Touch and select the file to copy.
2.
Touch the [Copy] button.
3.
Select the target folder.
(Selecting a folder is not needed for outputting
directly below the drive.)
At this time, it cannot be copied into the same
folder where the file exists.
Select other folders.
4.
If touch [Exec.] button, the following dialog box
shown left is displayed.
Touch [OK] button.
(While executing, "Processing..." message
appears on the screen.)
5.
If there is a file of the same name in the copy
destination folder, the following dialog is displayed
without starting the copy.
If touch the [OK] button, overwrites the file.
If touch [Cancel] button, cancels to copy.
6.
When the copy is completed, the dialog box of
completion is displayed.
If touch [OK] button, closes the dialog box.