Installing To/Removing From Panel - Mitsubishi Electric GT16 User Manual

7.1.4

Installing to/removing from panel


Installing the Connector Conversion Box (GT16H-CNB-42S) on the panel
(1) Overview
The following describes the panel processing when the GOT is installed or removed by attaching a Connector
Conversion Box to the control panel or operation panel.
Handy GOT
External cable (Connector Conversion Box connection
1)
side 42 pins)
2) PLC connection cable
3) Connector Conversion Box
Select the cable according to the communication method and controller.
For the cable selection, refer to the following.
8. COMMUNICATION CABLE
20. to 64.
(2) Panel cutting dimensions for Connector Conversion Box
The Connector Conversion Box can be installed on the panel face directly or with mounting bracket
offered as an accessory.
For details on installing procedure and panel cutting dimensions, refer to the following.
6.7 Connector Conversion Box
3)
1)
Name
Control panel or
operation panel
PLC
2)
Refer to Section 5.7
for panel cutting dimensions
Cable
GT16H-C30-42P
GT16H-C60-42P
GT16H-C100-42P
Select or prepare appropriate cables for the
communication method and controllers.
GT16H-CNB-42S
7. INSTALLATION
7.1 Installing Procedure
1
2
3
4
5
6
7
8
7 - 3