Determining The Got Side Interface (Interface Selection) - Mitsubishi Electric GT16 User Manual

30.3.3 Determining the GOT side interface (Interface selection)

Use the GOT by combining the RS-232 interface, RS-422/485 interface and Ethernet interface which are built in GOT.
For the connection via the connection type selected in 30.3.2, select interfaces to be used.
Select the interfaces and according to the connection type by referring to the following.
Selected connection type
• Ethernet Connection
• Third party PLC connection (Ethernet connection)
®
• MODBUS /TCP connection
• Robot controller connection
• CNC connection (Ethernet connection)
• Direct CPU connection
• Computer link connection
• CC-Link connection (via G4)
• Third party PLC connection (serial connection)
• Microcomputer connection
• GOT Multi- Drop Connection
®
• MODBUS /RTU connection
• Temperature controller connection
• Inverter connection
• Servo amplifier connection
• CNC connection (serial connection)
Ethernet interface
RS-232 interface
RS-422/485 interface
RS-422/485 interface and RS-232 interface cannot be
used at the same time. Switch the RS-422/485 interface
and RS-232 interface with the RS-422/485
selection connector in the environmental protection back cover.
Reference for required interface and communication unit
This section ■ GOT interface used for Ethernet connection
This section ■ GOT interface used for serial connection
30. MULTI-CHANNEL FUNCTION
RS-232
30.3 GOT Side Settings
28
29
30
31
32
33
34
35
30 - 5