Mitsubishi Electric GT16 User Manual page 75


Removing
Front
Interface environmental
protection cover
CF card
access switch
Front
POINT POINT POINT
Precautions for removing the CF card
(1) While the CF card access LED is on, do not install/remove the CF card or power off the GOT.
To do so may cause data corruption or malfunction.
(2) When ejecting the CF card, support it by hand since it may pop out.
Failure to do so may cause a fall of the CF card leading to failure or damage of the card.
CF card
Interface
CF card CF card
access LED eject button
1.
Open the interface environmental protection cover
in the arrow-pointing direction.
2.
Set the CF card access switch of the GOT to
"OFF." Make sure that the CF card access LED
turns off.
When the CF card access LED turns off, the CF
card can be installed or removed even during the
GOT power on.
3.
Push-in the CF card eject button of the GOT to
eject the CF card, and then remove the CF card.
4.
Close the interface environmental protection cover.
6. OPTION
6.1 CF Card
1
2
3
4
5
6
7
8
6 - 3