Installing And Removing Procedures Of The Cf Card - Mitsubishi Electric GT16 User Manual

6.1.2

Installing and removing procedures of the CF card

Install/remove the CF card with the power supply of GOT is OFF or CF card access switch is "OFF".

Installing
Front
Interface environmental
protection cover
CF card
access switch
CF card inserting direction
Front
Front
6 - 2
6. OPTION
6.1 CF Card
CF card
Interface
CF card CF card
access LED eject button
CF card nameplate side
1.
Open the interface environmental protection cover
in the arrow-pointing direction.
2.
Set the CF card access switch of the GOT to
"OFF", and make sure that the CF card access
LED turns off.
When the CF card access LED turns off, the CF
card can be installed even during the GOT power
on.
3.
To install the CF card to the GOT, insert the CF
card into the CF card interface with its front side
outside.
4.
Push-in the CF card until the CF card eject button
snaps.
5.
Turn the CF card access switch on.
After the CF card access switch is turned on, the
CF card can be used.
6.
Close the interface environmental protection
cover.