Protective Sheet - Mitsubishi Electric GT16 User Manual

6.5 Protective Sheet

The protective sheet is used to protect the operation surface from damage or dirt when the touch key of GOT display
section is operated.
For the Handy GOT, the protective sheet is attached for transportation.
(It is different from the one described in this chapter.)
6.5.1 Applicable protective sheet
Product name
Protective sheet
6.5.2 Installing procedure
Protective film
Adhesive
part sheet
POINT POINT POINT
Replacement time of protective sheet
Check the status of the protection sheet visually by to the daily inspection.
The visibility becomes worse when there is too much dirt and cracks, causing malfunction. Proceeds replacement
promptly.
6 - 6
6. OPTION
6.5 Protective Sheet
Model
GT16H-60PSC Protective sheet for GOT
Contents
Clear 5 sheets
1.
If the protective sheet has been already attached to
the GOT, remove the old one from the GOT display
section holding the lower right corner.
If the protective sheet for transportation is attached to
the GOT, remove it too.
2.
Peel the protective films and the adhesive part sheet
of a new protective sheet.
3.
Attach the adhesive side to the GOT display section.
When attaching the protective sheet, make sure to fit
it on the display section closely without leaving any
clearance between them.