Opening And Closing Of Environmental Protection Back Cover - Mitsubishi Electric GT16 User Manual

4.2.2

Opening and closing of environmental protection back cover


Opening

Closing
4.2.3 Changing the grip angle
The grip angle can be changed in GT16 Handy.
*
Environmental
protection
back cover screw
Environmental
protection
back cover screw
*
1.
Loosen the environmental
protection back cover screws at two
points to remove the cover.
1.
Mount the environmental protection
back cover, and tighten the screws
with the following torque. Too much
tightening may cause damage.
Tightening torque: 0.36 to 0.48 N•m
1.
Loosen the five grip angle changing
screws on the back surface.
Do not loosen or remove the screws
marked with * (two screws).
2.
Turn the grip.
Adjust the threaded holes and
tighten the grip angle changing
screws with the following tightening
torque.
Too much tightening may cause
damage.
Tightening torque: 0.69 to 0.88N•m
4. PARTS NAME
4.2 Back Panel
1
2
3
4
5
6
7
8
4 - 3