Control Of Various Data (Data Control); Data Storage Location; Data Type And Storage Location - Mitsubishi Electric GOT2000 Series User Manual

15. CONTROL OF VARIOUS DATA (DATA CONTROL)

A system application, project data (screen data), or alarm data which is written in the GOT or SD card can be displayed, and
the data can be transferred between the GOT and SD card.
The format of the SD card is also possible.

15.1 Data Storage Location

15.1.1

Data type and storage location

■1. System
The data storage location and transferring (write/read) route for each data type are shown below.
Also, the data storage locations are shown below.
Install/
Download
System application
BootOS
Project data
A drive
*1
(Standard SD card)
SD card
(when installed in GOT)
*1 For the GT2103-P, the separately sold SD card unit (GT21-03SDCD) is required.
*2 Only available to GT2107-W.
The data of the built-in flash memory (Project data, etc.) can be saved even if the battery voltage becomes low.
Item
BootOS
*1
System application
*1
Project data
*1 The SD card can be used from Utility.
➠
*2 When using the project data stored in the Standard SD Card (A drive) with the GOT, hold the SD card installed to the GOT.
C drive
(Built-in flash memory)
Upload
System application
BootOS
Project data
E drive
*2
(USB drive)
USB memory
(when installed in GOT)
BootOS
Basic system application
Communication driver
Advanced system application
Project data
(Including recipe setting, alarm conditions, time action, and GOT setup.)
15.2 OS information
System application
BootOS
Project data
Write
Read
Project data
Copy files on Windows
Project data
Inserting/
Removing
SD card
(when installed in PC)
Data type
15.1 Data Storage Location
PC
GT Designer3
Write
®
BootOS
Project data
USB memory
(when installed in PC)
Install, Write:
Upload, Read:
Storage location
Built-in flash memory (C drive)
Standard SD card (A drive)
Built-in flash memory (C drive)
*2
Standard SD card (A drive)
Built-in flash memory (C drive)
*2
15 - 1
15