Mitsubishi Electric GT16 User Manual page 69


About the cable used
Any device which utilizes a data communication function is susceptible to the wider effects of local EMC noise.
Therefore, when installing any communication cables care should always be taken with the routing and location of
those cables. The GOT identified on the previous page are compliant with the EMC requirement when the following
communication cables are used.
(1) External cable
GT16H-C30-42P, GT16H-C60-42P, GT16H-C100-42P
(2) Direct connection cable
Existing Cables
GT01-C30R4-8P
GT11H-C30R2-6P
(3) Ethernet connection cable
Shielded twisted pair cable (STP)
(4) PLC (manufactured by other company), microcomputer, temperature controller, inverter, servo amplifier,
CNC, MODBUS(R)/RTU or MODBUS(R)/TCP connection
Produce the cable (RS-232 cable, RS-422 / 485 cable) for connecting the GOT to a controller with reference to
the following manual.
GOT1000 Series Connection Manual for GT Works3 and a controller used
User Made Cables
The cable need to be independently tested by the user to demonstrate EMC
compatibility when they are used with the GOT, the PLC of MELSEC-Q series,
MELSEC-L series, MELSEC-QnA, MELSEC-A series and MELSEC-FX series.
5. UL, cUL STANDARDS AND EMC DIRECTIVE
5.2 EMC Directive
1
2
3
4
5
6
7
8
5 - 5