Top Face (Interface) - Mitsubishi Electric GT16 User Manual

4.3 Top Face (Interface)

4.3.1 Names and specifications

Interface environmental protection cover closed

Interface environmental protection cover opened
No. Name
Emergency stop switch guard
(1)
cover installing hole
Interface environmental protection
(2)
cover
(3) Keylock switch (2-position switch)
(4) CF card access switch
(5) CF card interface
(6) CF card eject button
(7) CF card access LED
(8) USB interface (Device)
(9) USB interface (Host)
S.MODE switch
(10)
(OS install switch)
(11) Reset switch
Ethernet communication status
(12)
LED
4 - 4
4. PARTS NAME
4.3 Top Face (Interface)
(1)
(8)
(9)
(4) (7) (5)
Threaded hole for mounting the GT16H-60ESCOV type emergency stop switch guard (option) (M3)
Opened and closed when using the USB port, S.MODE switch and reset switch, as well as when inserting
the CF card.
Switch for external direct wiring (independent contact)
Prohibits accessing the CF card before removing the card from the Handy GOT.
(OFF before shipping.)
ON : CF card being accessed. (CF card removal prohibited)
OFF : CF card not accessed. (CF card removal possible)
Connector for mounting the CF card (compact flash card) to the Handy GOT
CF card removal button
Lit (green) : CF card being accessed. (transferring between the CF card and the Handy GOT)
Not lit : CF card not accessed.
For PC connection (connector type: MINI-B)
For data transfer, data storage (connector type: TYPE-A)
Switch used for OS installation at GOT startup.
Switch for resetting the hardware
LED2: Turns on in green during data communication,
LED1: Turns on in green during 100Mbps transmission.
(2)
(3)
(11)
(10)
LED2 LED1
(6) (12)
Specifications