Memory Card Adaptor - Mitsubishi Electric GT16 User Manual

6.2 Memory Card Adaptor

The memory card adaptor is used to convert the CF card into the memory card (Type II).
Install the memory card adaptor to a PC equipped with a PCMCIA interface, to write the OS or project data on the CF
card from the PC or load alarm history data from the CF card to the PC.
Refer to the following for the details related to CF card.
6.2.1 Applicable memory card adaptor
The following memory card adaptor is applicable.
Model
GT05-MEM-ADPC
6.2.2 Installing procedure of the CF card into a memory card adaptor
Fit the CF card in the memory card adaptor.
6.3 USB Memory
The USB memory is used to transmit the CS or project data and to save the data of the alarm history function.
For details, refer to the following.
6.3.1 Applicable USB memory
The following USB memories are applicable for Handy GOT.
Model
-
*1 Some models with the operations checked by our company are usable.
For the operation-checked models, refer to "List of valid devices applicable for GOT 1000 series" (GOT-A-0010) separately
available, or contact your local distributor.
6.3.2 Installing and removing procedures of the USB memory
1.
When USB memory is accurately inserted to the USB interface, the GOT automatically recognizes it.
Refer to the following for removing the USB memory.
6 - 4
6. OPTION
6.2 Memory Card Adaptor
6.1 CF Card
Adaptor converting from CF card to memory card (Type II)
15. DATA CONTROL
Commercially-available USB memory
13.3.6 USB device status display
Contents
CF card Memory card adaptor
Description
*1