Table of Contents
Advertisement
13. FILE DISPLAY AND COPY
(PROGRAM/DATA CONTROL)
The display of OS, project data or alarm data which is written in the GOT or SD card and the data transmission between
GOT and SD card/USB memory are possible.
The format of the SD card/USB memory is also possible.
13.1 Data Storage Location
13.1.1 Data type and storage location
System
The data storage location and transferring (write/read) route for each data type are shown below.
Also, the data storage locations are shown below.
OS
BootOS
Install/
Download
Project data
A drive
(Built-in SD card)
SD card
(when installed in GOT)
The data of the Flash Memory (Project data, etc.) can be saved even if the battery voltage becomes low.
Item
BootOS
BootOS
Standard monitor OS
Communication driver
*1
OS
Extended function OS
Option OS
*1
Project data
Project data
(Including recipe setting, alarm conditions, time action, and GOT setup.)
*1
The USB memory can be used from Utility.
*2
When using the project data stored in the built-in SD card (A drive) with the GOT, hold the SD card installed to the GOT. The USB
memory cannot be activated directly from the E drive. It can be used only for data storage.
C drive
(Built-in flash memory)
BootOS
OS
Upload
Project data
E drive
(USB drive)
USB memory
(when installed in GOT)
Data type
16.3.2 Installing using the program/data control function (Utility)
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
OS
BootOS
Project data
Write
Read
Project data
Copy files on
Windows
Project data
Inserting/
Removing
SD card
(when installed in PC)
Install, Write :
Upload, Read :
Built-in flash memory (C drive)
Built-in SD card (A drive)
Built-in flash memory (C drive)
*2
Built-in SD card (A drive)
Built-in flash memory (C drive)
*2
13.1 Data Storage Location
PC
GT Designer3
Write
BootOS
Project data
USB memory
(when installed in PC)
Storage location
13 - 1
9
10
11
12
13
14
15
16
Advertisement
Table of Contents
