Graphic Operation Terminal GOT-F900
Operation environment setting
The operation environment setting function performs initial setting important to operating the
GOT. The SET-UP MODE screen can be displayed by turning on the power while pressing and
holding the upper left corner of the screen in accordance with "2.1 Start up procedure" or by
selecting SET-UP MODE on the OTHER MODE screen.
If an entry code has been registered using the security function (to protect screens), the
operation environment can be set only when an entry code input by the user is equivalent to
the registered entry code.
Turn on the power while pressing
and holding the upper left corner of
Set the system language.
Press the END key.
The SET-UP MODE screen is
The areas enclosed with broken lines function as touch keys. (Broken lines are not actually
displayed on the screen.)
Allows setting of the language displayed on the system screens such as Japanese or
b) PLC TYPE
Allows setting of the connected PLC type.
c) SERIAL PORT
To be selected when a printer is connected to the GOT or when communication is
performed between the GOT and a micro computer board.
d) OPENING SCREEN
Allows setting of the duration in which the OPENING SCREEN is displayed immediately
after the power is turned ON.
e) MAIN MENU CALL KEY
Allows setting of the position of the touch key which calls the SELECT MODE screen
from the screen mode (in which a user screen is displayed).
f) SET CLOCK
Allows setting of the time used in the time switch and time display.
g) SET BACKLIGHT
Allows setting of the time the backlight is automatically turned OFF, after a period of
continuous idle time.
Allows setting of the buzzer sound issued when a key is pressed.
[SET UP MODE MENU SCREEN]
[SET UP MODE]
SERIAL PORT (RS232C)
MAIN MENU CALL
CLEAR USER DATA
Start up 7