Utility Call Key Setting - Mitsubishi Electric GT14 User Manual

11.2.5

Utility Call Key Setting


Utility call key setting function
The key position for calling the main menu of the utility can be specified.
For the key position, 0 or 1 point can be specified from 4 corners on the screen.
By keeping pressing the screen, a setting to switch the screen to the utility is available.
This prevents a switching to the utility by an unintentional operation.
POINT POINT POINT
Operation setting by GT Designer3
Select [Common Settings]
of the utility call key.
To change a part of the setting after downloading the project data, change the setting at the display setting of GOT.
GT Designer3 Version1 Screen Design Manual (Fundamentals)

Display operation of Utility call key
Main menu
( 9.3 Utility Display)
Touch
[GOT setup]
[GOT Environment Settings]
GOT setup
Touch
[Operation]
Menu call key
11. DISPLAY AND OPERATION SETTINGS (GOT SET UP)
11.2 Operation Setting (Settings Regarding Operation)
[GOT Setup] from GT Designer3 to make the settings
Operation
Touch
[Utility call key]
Touch buttons to set
for the utility call key
9
10
11
12
13
14
15
16
11 - 11