11.5.3 Utility call key setting operation
11 - 17
11.5 Utility Call Key Setting
11.5.3 Utility call key setting operation
Touch
or
1
corners of the setting screen.
The button repeats
time it is pressed.
Change the part to be set as a key position
to
.
The key position can be set to the zero
point.
When the key position is specified by one
2
point, the time to switch to the utility when
the key position is kept pressing can be
set.
Touch the time area.
The keyboard is displayed if the input area
3
is touched.
Input a setting time from the keyboard.
Setting contents are defined by touching
4
button.
OK
If
button is touched without touching
5
button, the dialogue box shown on
OK
the left is displayed.
button:
The changed value is
OK
canceled, and the screen
is closed.
button:The utility call key setting
Cancel
screen is displayed.
After finishing all the settings for items to
6
be changed on the operation screen,
closing "Operation" and "GOT setup"
screens with
button restarts GOT and
reflects the setting contents.
displayed on the four
every