Graphic Operation Terminal F930GOT
Operation environment setting
The operation environment setting function performs initial setting important to operation of the
GOT. The SET-UP MODE screen can be displayed by turning on the power while pressing and
holding the upper left corner of the screen in accordance with "2.1 Start up procedure" or by
selecting "OTHER MODE" on the SELECT MODE.
If an entry code has been registered using the security function (to protect screens), the oper-
ation environment can be set only when an entry code input by the user is equivalent to the
registered entry code.
Turn on the power while
pressing and holding the
upper left corner of
Set the system
language. (Refer to the
Press the END key.
The SET-UP MODE
screen is displayed as
shown on the right.
The areas enclosed with broken lines function as touch keys. (Broken lines are not actually dis-
played on the screen.)
Allows to set the language displayed on the system screens such as Japanese and English.
2) PLC TYPE
Allows to set the connected PLC type.
3) SERIAL PORT (RS232C)
To be selected when a printer is connected to the GOT or when communication is per-
formed between the GOT and a micro computer board.
4) OPENING SCREEN
Allows to set the duration in which the OPENING SCREEN screen is displayed immediately
after the power is turned on.
5) MAIN MENU CALL KEY
Allows to set the position of the touch key which calls the SELECT MODE screen from the
screen mode (in which user screens are displayed).
6) SET CLOCK
Allows to set the time used in the time switch and the time display.
7) SET BACKLIGHT
Allows to set the time at which the backlight automatically turns off.
Allows to set the buzzer sound issued when a key is pressed.
9) LCD CONTRAST
Allows to set the LCD brightness.
10)CLEAR USER DATA
Deletes the user screen data.
[SET-UP MODE SCREEN]
SERIAL PORT (RS232C)
MAIN MENU CALL KEY
CLEAR USER DATA
Start up 2