Setting the utility call keys
Utility call key setting function
The key position for calling the main menu of the utility can be specified.
For the key position, the specification of 1 point from 4 corners on the screen, or no specification (0 point), can be set.
By keeping pressing the screen, a setting to switch the screen to the utility is available.
This prevents a switching to the utility by an unintentional operation.
Operation setting by GT Designer3
Set the utility call key by selecting [Common]
Designer3.
When change a part of the setting, change the setting by the GOT display setting after downloading the
project data.
GT Designer3 (GOT2000) Screen Design Manual
Utility call key display operation
Main menu
Touch
[GOT setup].
Utility call
[GOT Environmental Setting]
GOT setup
Touch
[Operation].
Operation
Touch bottoms
to set for the
Utility call key.
12 DISPLAY AND OPERATION SETTINGS (GOT SET UP)
[GOT Setup] from GT
Touch
[Utility call].
12.2 Operation Setting (Settings for Operation)
12
113