Memory - H3C s3600 series Command Manual

Field
The times of reconnect
The current state

memory

Syntax
memory { safety safety-value | limit limit-value }*
undo memory [ safety | limit ]
View
System view
Parameters
safety-value: Safety free memory of the switch , in Mbytes. Its value range depends on the free memory
of the current switch. This value defaults to 5.
limit-value: Lower limit of the switch free memory, in Mbytes. Its value range depends on the free
memory of the current switch. This value defaults to 4.
Description
Use the memory limit limit-value command to configure the lower limit of the switch free memory.
When the free memory of the switch is less than the limit-value, all the routing protocol connections will
be disconnected forcibly.
Use the memory safety safety-value command to configure the safety value of the switch free memory.
If you use the memory auto-establish enable command (the default configuration), the routing
protocol connection that is forcibly disconnected automatically recovers when the free memory of the
switch reaches the safety-value.
Use the memory safety safety-value limit limit-value command to change both the safety value and
lower limit of the switch free memory.
Use the undo memory command to restore the default safety value and lower limit of the switch free
memory.
Related commands: memory auto-establish disable, memory auto-establish enable, display
memory limit.
When you configure the memory command, the safety-value argument in the command must be
greater than the limit-value argument; otherwise, the configuration will fail.
Number of reconnections of the routing protocol
Current memory state, including
Normal
Exigence
6-3
Description