Protocol-Priority Protocol-Type - H3C s3600 series Command Manual

[Sysname] interface Ethernet1/0/1
[Sysname-Ethernet1/0/1] priority trust

protocol-priority protocol-type

Syntax
protocol-priority protocol-type protocol-type { ip-precedence ip-precedence | dscp dscp-value }
undo protocol-priority protocol-type protocol-type
View
System view
Parameters
protocol-type protocol-type: Specifies the protocol type, which could be Telnet, SNMP, ICMP, or OSPF.
ip-precedence ip-precedence: Specifies an IP precedence in digits for the specified protocol, in the
range 0 to 7. Alternatively, you can specify the IP precedence in words; available keywords are listed in
Table 1-6.
Table 1-6 IP precedence values in words and in digits
IP precedence (in words)
routine
priority
immediate
flash
flash-override
critical
internet
network
dscp dscp-value: Specifies an DSCP precedence in digits for the specified protocol, in the range of 0 to
63. Alternatively, you can specify the DSCP precedence in words; available keywords are listed in
1-7.
Table 1-7 DSCP precedence values in words and in digits
DSCP precedence (in words)
af11
af12
af13
af21
af22
af23
af31
IP precedence (in digits)
0
1
2
3
4
5
6
7
DSCP precedence (in digits)
10
12
14
18
20
22
26
1-16
Table