H3C s3600 series Command Manual page 637

Description
Use the display arp command to display specific ARP entries.
If you execute this command with no keyword/argument specified, all the ARP entries are displayed.
Related commands: arp static, reset arp.
Examples
# Display all the ARP entries.
<Sysname> display arp
Type: S-Static
IP Address
10.2.72.162
192.168.0.77
192.168.0.2
192.168.0.200
192.168.0.45
192.168.0.110
192.168.0.32
192.168.0.3
192.168.0.17
192.168.0.115
192.168.0.43
192.168.0.33
192.168.0.35
192.168.0.5
--- 14 entries found
Table 1-1 Description on the fields of the display arp command
Field
IP Address
MAC Address
VLAN ID
Port Name / AL ID
Aging
Type
display arp |
Syntax
display arp [ dynamic | static] | { begin | exclude | include } regular-expression
D-Dynamic
MAC Address VLAN ID
000a-000a-0aaa N/A
0000-e8f5-6a4a 1
000d-88f8-4e88 1
0014-222c-9d6a 1
000d-88f6-44c1 1
0011-4301-991e 1
0000-e8f5-73ee 1
0014-222c-aa69 1
000d-88f6-379c 1
000d-88f7-9f7d 1
000c-760a-172d 1
000d-88f6-44ba 1
000f-e20f-2181 1
000f-3d80-2b38 1
---
IP address contained in an ARP entry
MAC address contained in an ARP entry
ID of the VLAN which an ARP entry corresponds to
Port which an ARP entry corresponds to
Aging time (in minutes) of an ARP entry
N/A is displayed for static ARP entries.
Type of an ARP entry: D for dynamic, and S for static.
Port Name / AL ID
N/A
Ethernet1/0/2
Ethernet1/0/2
Ethernet1/0/2
Ethernet1/0/2
Ethernet1/0/2
Ethernet1/0/2
Ethernet1/0/2
Ethernet1/0/2
Ethernet1/0/2
Ethernet1/0/2
Ethernet1/0/2
Ethernet1/0/2
Ethernet1/0/2
Description
1-9
Aging Type
N/A S
13 D
14 D
14 D
15 D
15 D
16 D
16 D
17 D
18 D
18 D
20 D
20 D
20 D