Nbns-List; Netbios-Type - H3C s3600 series Command Manual

nbns-list

Syntax
nbns-list ip-address&<1-8>
undo nbns-list { ip-address | all }
View
DHCP address pool view
Parameters
ip-address&<1-8>: IP address of a WINS server. &<1-8> means you can provide up to eight WINS
server IP addresses. When inputting more than one IP address, separate two neighboring IP addresses
with a space.
all: Specifies all configured WINS server IP addresses.
Description
Use the nbns-list command to configure one or multiple WINS server IP addresses in the DHCP global
address pool for the DHCP client.
Use the undo nbns-list command to remove one or all WINS server IP addresses configured for the
DHCP client.
By default, no WINS server IP address is configured.
If you execute the nbns-list command repeatedly, the new configuration overwrites the previous one.
Related commands: dhcp server ip-pool, dhcp server nbns-list, netbios-type.
Examples
# Enter system view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
# Configure the WINS server IP address 10.12.1.99 in the global DHCP address pool 0 for the DHCP
client.
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] nbns-list 10.12.1.99

netbios-type

Syntax
netbios-type { b-node | h-node | m-node | p-node }
undo netbios-type
View
DHCP address pool view
Parameters
b-node: Specifies the b-typed node. Nodes of this type acquire host name-to-IP address mapping by
broadcasting.
1-33