Destination Address; Route Preference - H3C s3600 series Command Manual

192.168.1.2/32 DIRECT
For descriptions of the above fields, refer to
# Display the detailed information of routes that match ACL 2100.
<Sysname> display ip routing-table acl 2100 verbose
Routes matched by access-list 2100:
+ = Active Route, - = Last Active, # = Both
Summary count: 3
**Destination: 192.168.1.0
Protocol: #DIRECT
*NextHop: 192.168.1.2
State: <Int ActiveU Retain Unicast>
Age: 21:34:13
**Destination: 192.168.1.2
Protocol: #DIRECT
*NextHop: 127.0.0.1
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 21:34:13
Table 1-2 Description on the fields of the display ip routing-table command
Field
Destination

Destination address

Mask Subnet mask
Protocol Protocol that discovers the route
Preference

Route preference

Nexthop Next hop to the destination
Outbound interface through which data packets are forwarded to the destination
Interface
network segment.
0 0 127.0.0.1
Table 1-1.
Mask: 255.255.255.0
Preference: 0
Interface: 192.168.1.2(Vlan-interface2)
Cost: 0/0
Mask: 255.255.255.255
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
Cost: 0/0
Description
1-4
InLoopBack0
* = Next hop in use