Dot1X Max-User - H3C s3600 series Command Manual

Examples
# Enable the handshaking packet protection function.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] dot1x handshake secure

dot1x max-user

Syntax
dot1x max-user user-number [ interface interface-list ]
undo dot1x max-user [ interface interface-list ]
View
System view, Ethernet port view
Parameters
user-number: Maximum number of users a port can accommodate, in the range 1 to 256.
interface-list: Ethernet port list, in the form of interface-list= { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, in which interface-type specifies the type of an Ethernet
port and interface-number is the number of the port. The string "&<1-10>" means that up to 10 port lists
can be provided.
Description
Use the dot1x max-user command to set the maximum number of users an Ethernet port can
accommodate.
Use the undo dot1x max-user command to revert to the default maximum user number.
By default, a port can accommodate up to 256 users.
In system view:
If you do not provide the interface-list argument, these two commands apply to all the ports of the
switch.
If you specify the interface-list argument, these two commands apply to the specified ports.
In Ethernet port view, the interface-list argument is not available and the commands apply to only the
current port.
Related commands: display dot1x.
Examples
# Configure the maximum number of users that Ethernet 1/01 port can accommodate to be 32.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x max-user 32 interface Ethernet 1/0/1
1-10