Display Arp Count - H3C s3600 series Command Manual

View
Any view
Parameters
dynamic: Displays dynamic ARP entries.
static: Displays static ARP entries.
|: Uses a regular expression to specify the ARP entries to be displayed. For detailed information about
regular expressions, refer to Configuration File Management Command in this manual.
begin: Displays the first ARP entry containing the specified string and all subsequent ARP entries.
exclude: Displays the ARP entries that do not contain the specified string.
include: Displays the ARP entries containing the specified string.
regular-expression: A case-sensitive character string.
Description
Use the display arp | command to display the ARP entries related to string in a specified way.
Related commands: arp static, reset arp.
Examples
# Display all the ARP entries that contain the string 77.
<Sysname> display arp | include 77
Type: S-Static
IP Address
192.168.0.77
--- 1 entry found
# Display all the ARP entries that do not contain the string 68.
<Sysname> display arp | exclude 68
Type: S-Static
IP Address
10.2.72.162
--- 1 entry found
Refer to Table 1-1

display arp count

Syntax
display arp count [ [ dynamic | static ] [ | { begin | exclude | include } regular-expression ] |
ip-address ]
View
Any view
D-Dynamic
MAC Address VLAN ID
0000-e8f5-6a4a 1
---
D-Dynamic
MAC Address VLAN ID
000a-000a-0aaa N/A
---
for the description on the above output information.
Port Name / AL ID
Ethernet1/0/2
Port Name / AL ID
N/A
1-10
Aging Type
12 D
Aging Type
N/A S