H3C s3600 series Command Manual page 136

Description
Use the display brief interface command to display the brief configuration information about one or all
interfaces, including: interface type, link state, link rate, duplex attribute, link type, default VLAN ID and
description string.
Currently, for the port types other than Ethernet port, this command only displays the link state, and
shows "--" in all other configuration information fields.
Related commands: display interface.
Examples
# Display the brief configuration information about the Ethernet 1/0/1 port.
<Sysname> display brief interface Ethernet 1/0/1
Interface:
Eth - Ethernet
Loop - LoopBack
Speed/Duplex:
A - auto-negotiation
Interface Link
------------------------------------------------------------------------
Eth1/0/1 DOWN
Table 1-2 Description on the fields of the display brief interface command
Field
Interface
Link
Speed
Duplex
Type
PVID
Description
The state of an Ethernet port can be UP, DOWN, or ADMINISTRATIVELY DOWN. The following table
shows the port state transitions.
GE - GigabitEthernet TENGE - tenGigabitEthernet
Vlan - Vlan-interface
Speed Duplex Type
A A hybrid 1
Port type
Current link state: UP, DOWN or ADMINISTRATIVELY DOWN
Link rate
Duplex attribute
Link type: access, hybrid or trunk
Default VLAN ID
Port description string
Cas - Cascade
PVID Description
home
Description
1-6