H3C s3600 series Command Manual page 617

If only a VLAN interface is specified, the statistics information about all the VRRP groups on the
specified VLAN interface is displayed.
If both a VLAN interface and a VRRP group are specified, the statistics information about the
specified VRRP group on the specified VLAN interface is displayed.
You can clear the VRRP statistics by using the reset vrrp statistics command.
Related commands: reset vrrp statistics
Examples
# Display the VRRP statistics information about all the VRRP groups.
<Sysname> display vrrp statistics
Interface
VRID
CheckSum Errors
VRID Errors
IP TTL Errors
Invalid Auth Type
Packet Length Errors
Become Master
Advertise Rcvd
Invalid Type Pkts Rcvd : 0
Table 1-3 Description on the fields of the display vrrp statistics command
Interface
VRID
CheckSum Errors
Version Errors
VRID Errors
Advertisement Interval Errors
IP TTL Errors
Auth Failures
Invalid Auth Type
Auth Type Mismatch
Packet Length Errors
Address List Errors
Become Master
Priority Zero Pkts Rcvd
Advertise Rcvd
Priority Zero Pkts Sent
: Vlan-interface1
: 1
: 0
: 0
: 0
: 0
: 0
: 1
: 0
Field
Version Errors
Advertisement Interval Errors
Auth Failures
Auth Type Mismatch
Address List Errors
Priority Zero Pkts Rcvd
Priority Zero Pkts Sent
Interface where the VRRP group resides
VRRP group ID
Number of checksum errors
Number of version errors
Number of virtual router ID errors
Number of errors of the interval for sending VRRP
advertisements
Number of TTL errors
Number of authentication errors
Number of invalid authentication types
Number of mismatched authentication types
Number of VRRP packet length errors
Number of the virtual IP address list errors
Number of the occasions where the current switch operates
as the master
Number of the received VRRP advertisements with the
priority of 0
Number of the received VRRP advertisements
Number of the sent advertisements with the priority of 0
1-4
: 0
: 0
: 0
: 0
: 0
: 0
: 0
Description