H3C s3600 series Command Manual page 22

Filed
Privi
Auth
Int
Super
A
N
P
S
# Display the summary information about the user interface.
<Sysname> display user-interface summary
User interface type : [AUX]
0:UXXX XXXX
User interface type : [VTY]
8:UUUU X
5 character mode users.
8 UI never used.
5 total UI in use
Table 1-2 Description on the fields of the display user-interface summary command
Field
User interface type
0:UXXX XXXX/8:UUUU X
character mode users.
UI never used.
total UI in use.
Available command level
Authentication mode
Physical position of the user interface
The authentication mode used for a user to switch
from the current lower user level to a higher level,
including S, A, SA and AS.
S: Super password authentication
A: HWTACACS authentication
SA: Super password authentication is preferred, with
HWTACACS authentication being a backup
AS: HWTACACS authentication is preferred, with
super password authentication being a backup
For details about the four authentication modes, refer
to the CLI part of the manual.
The current user authentication mode is scheme.
The current user authentication mode is none.
The current user authentication mode is password.
Super password authentication
(U)
(X)
User interface type: AUX or VTY
0 and 8 represent the least absolute number for AUX user
interfaces and VTY user interfaces. "U" and "X" indicate
the usage state of an interface: U indicates that the
corresponding user interface is used; X indicates that the
corresponding user interface is idle. The total number of
Us and Xs is the total number of user interfaces that are
available.
(U) The number of current users, that is, the number of Us
The number of user interfaces not being used currently,
(X)
that is, the number of Xs
The total number of user interfaces being used currently,
that is, the total number of users currently logging in to the
switch successfully
1-8
Description
Description