H3C s3600 series Command Manual page 165

Hide thumbs Also See for s3600 series:

Table of Contents

# Enable the system to test the cable connected to Ethernet 1/0/1.

<Sysname> system-view

System View: return to User View with Ctrl+Z.

[Sysname] interface Ethernet 1/0/1

[Sysname-Ethernet1/0/1] virtual-cable-test

Cable status: normal, 0 meter(s)

Pair Impedance mismatch: -

Pair skew: - ns

Pair swap: -

Pair polarity: -

Insertion loss: - db

Return loss: - db

Near-end crosstalk: - db

Show Quick Links

Chapters

Table of Contents

Do you have a question about the s3600 series and is the answer not in the manual?