Cli Configuration Commands; Command-Privilege Level - H3C s3600 series Command Manual

1

CLI Configuration Commands

The super authentication-mode command is added. For details, see
CLI Configuration Commands

command-privilege level

Syntax
command-privilege level level view view command
undo command-privilege view view command
View
System view
Parameters
level level: Command level to be set, in the range of 0 to 3.
view view: CLI view. It can be any CLI view that the Ethernet switch supports. The S3600 series support
only the CLI views listed in
Table 1-1 Available CLI views for the view argument
acl-adv
acl-basic
acl-ethernetframe
acl-user
aux
cluster
detect-group
dhcp-pool
ethernet
ftp-client
gigabitethernet
Table 1-1:
CLI view
Advanced ACL view
Basic ACL view
Layer 2 ACL view
User-defined ACL view
Aux 1/0/0 port view, that is, console port view
Cluster view
Detected group view
DHCP address pool view, which is supported by only the
S3600-EI series
100M Ethernet port view
FTP client view
GigabitEthernet port view
1-1
super authentication-mode.
Description