Speed; Stopbits - H3C s3600 series Command Manual

System View: return to User View with Ctrl+Z.
[Sysname] user-interface vty 0 4
[Sysname-ui-vty0-4] undo shell
% Disable ui-vty0-4 , are you sure ? [Y/N]y

speed

Syntax
speed speed-value
undo speed
View
AUX user interface view
Parameters
speed-value: Transmission speed (in bps). This argument can be 300, 600, 1200, 2400, 4800, 9600,
19,200, 38,400, 57,600, and 115,200.
Description
Use the speed command to set the transmission speed of the user interface.
Use the undo speed command to revert to the default transmission speed.
By default, the transmission speed is 9,600 bps.
Examples
# Set the transmission speed of the user interface AUX 0 to 115,200 bps.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] speed 115200

stopbits

Syntax
stopbits { 1 | 1.5 | 2 }
undo stopbits
View
AUX user interface view
Parameters
1: Sets the stopbits to 1.
1.5: Sets the stopbits to 1.5.
2: Sets the stopbits to 2.
Description
Use the stopbits command to set the stopbits of the user interface.
1-22