Spf-Schedule-Interval; Stub - H3C s3600 series Command Manual

spf-schedule-interval

Syntax
spf-schedule-interval interval
undo spf-schedule-interval
View
OSPF view
Parameters
interval: SPF calculation interval of OSPF, in seconds. It ranges from 1 to 10.
Description
Use the spf-schedule-interval command to configure the SPF calculation interval of OSPF.
Use the undo spf-schedule-interval command to restore the default.
By default, the SPF calculation interval of OSPF is 5 seconds.
According to the link state database (LSDB), the router running OSPF can calculate the shortest path
tree taking itself as the root and determine the next hop to the destination network according to the
shortest path tree. Adjusting SPF calculation interval restrains frequent network changes, which may
occupy too many bandwidth resources and router resources.
Examples
# Set the OSPF route calculation interval of H3C to 6 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ospf 1
[Sysname-ospf-1] spf-schedule-interval 6

stub

Syntax
stub [ no-summary ]
undo stub
View
OSPF area view
Parameters
no-summary: Disables an ABR from transmitting Type-3 LSAs to a Stub area.
Description
Use the stub command to configure the type of an OSPF area as "Stub".
Use the undo stub command to restore the default.
By default, no area is set to a Stub area.
4-49