H3C s3600 series Command Manual page 439

MSDP Peer 20.20.20.20, AS 100
Description:
Information about connection status:
State: Up
Up/down time: 14:41:08
Resets: 0
Connection interface: LoopBack0 (20.20.20.30)
Number of sent/received messages: 867/947
Number of discarded output messages: 0
Elapsed time since last connection or counters clear: 14:42:40
Information about (Source, Group)-based SA filtering policy:
Import policy: none
Export policy: none
Information about SA-Requests:
Policy to accept SA-Request messages: none
Sending SA-Requests status: disable
Minimum TTL to forward SA with encapsulated data: 0
SAs learned from this peer: 0, SA-cache maximum for the peer: none
Input queue size: 0, Output queue size: 0
Counters for MSDP message:
Count of RPF check failure: 0
Incoming/outgoing SA messages: 0/0
Incoming/outgoing SA requests: 0/0
Incoming/outgoing SA responses: 0/0
Incoming/outgoing data packets: 0/0
Table 4-2 display msdp peer-status command output description
Field
MSDP Peer
AS
State
Resets
Up/Down time
Connection interface
Number of sent/received messages
Number of discarded output messages
Description
MSDP peer address
Number of the AS where the MSDP peer is located. "?"
indicates that the system was unable to obtain the AS
number
MSDP peer status:
Up: Session set up; MSDP peer in session
Listen: Session set up; local device as server, in
listening state
Connect: Session not set up; local device as client, in
connecting state
Shutdown: Deactivated
Down: Connection failed
Number of times the MSDP peer connection is reset
Time passed since MSDP peer connection
establishment/failure
Interface and its IP address used for setting up a TCP
connection with the remote MSDP peer
Number of SA messages sent and received through this
connection
Number of discarded outgoing messages
4-3