Link-Aggregation Group Mode - H3C s3600 series Command Manual

Parameters
agg-id: Aggregation group ID, in the range of 1 to 416.
agg-name: Aggregation group name, a string of 1 to 32 characters.
Description
Use the link-aggregation group description command to set a description for an aggregation group.
Use the undo link-aggregation group description command to remove the description of an
aggregation group.
If you have saved the current configuration with the save command, after system reboot, the
configuration concerning manual and static aggregation groups and their descriptions still exists, but
that of the dynamic aggregation groups and their descriptions gets lost.
You can use the display link-aggregation verbose command to check the configuration result.
Examples
# Set the description abc for aggregation group 1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] link-aggregation group 1 description abc

link-aggregation group mode

Syntax
link-aggregation group agg-id mode { manual | static }
undo link-aggregation group agg-id
View
System view
Parameters
agg-id: Aggregation group ID, in the range of 1 to 416.
manual: Creates a manual aggregation group.
static: Creates a static aggregation group.
Description
Use the link-aggregation group mode command to create a manual or static aggregation group.
Use the undo link-aggregation group command to remove the specified aggregation group.
Related commands: display link-aggregation summary.
1-7