Display Mirroring-Group - H3C s3600 series Command Manual

Field
both

display mirroring-group

Syntax
display mirroring-group { group-id | all | local | remote-destination | remote-source }
View
Any view
Parameters
group-id: Specifies the mirroring group of which the configurations are to be displayed. The argument
takes a value in the range of 1 to 20.
all: Specifies to display the parameter settings of all mirroring groups.
local: Specifies to display the parameter settings of local port mirroring groups.
remote-destination: Specifies to display the parameter settings of the destination groups for remote
mirroring.
remote-source: Specifies to display the parameter settings of the source groups for remote mirroring.
Description
Use the display mirroring-group command to display port mirroring configurations.
Related commands: mirroring-group mirroring-port, mirroring-group monitor-port.
This command is available only on the S3600-EI series Ethernet switches.
Examples
# Display the configurations of a local mirroring group on your S3600-EI series Ethernet switch.
<Sysname> display mirroring-group 1
mirroring-group 1:
type: local
status: active
mirroring port:
Ethernet1/0/1
monitor port: Ethernet1/0/4
The direction of the mirrored packets, which can be one of the following:
both: means packets received on and sent from the source port are
mirrored.
inbound: means packets received on the source port are mirrored.
outbound means packets sent from the source port are mirrored.
both
1-2
Description