H3C s3600 series Command Manual page 898

Parameters
None
Description
Use the display snmp-agent statistics command to display the statistics on SNMP packets.
The statistics are collected from the time when the switch is started, and the statistics will not be cleared
if the SNMP is restarted.
If you execute the command when SNMP agent is not started, the device prompts "SNMP Agent
disabled".
Examples
# Display the statistics on SNMP packets.
<Sysname> display snmp-agent statistics
1276 Messages delivered to the SNMP entity
0 Messages which were for an unsupported version
0 Messages which used a SNMP community name not known
0 Messages which represented an illegal operation for the community supplied
0 ASN.1 or BER errors in the process of decoding
1291 Messages passed from the SNMP entity
0 SNMP PDUs which had badValue error-status
0 SNMP PDUs which had genErr error-status
7 SNMP PDUs which had noSuchName error-status
0 SNMP PDUs which had tooBig error-status (Maximum packet size 1500)
3669 MIB objects retrieved successfully
26 MIB objects altered successfully
420 GetRequest-PDU accepted and processed
832 GetNextRequest-PDU accepted and processed
0 GetBulkRequest-PDU accepted and processed
1276 GetResponse-PDU accepted and processed
24 SetRequest-PDU accepted and processed
15 Trap PDUs accepted and processed
0 Alternate Response Class PDUs droped silently
0 Forwarded Confirmed Class PDUs droped silently
Table 1-3 display snmp-agent statistics command output description
Messages delivered to the SNMP entity
Messages which were for an unsupported
version
Messages which used a SNMP community
name not known
Field
1-6
Description
The total number of messages delivered to the
SNMP entity from the transport service.
The total number of SNMP messages delivered
to the SNMP protocol entity and were for an
unsupported SNMP version.
The total number of SNMP messages delivered
to the SNMP protocol entity which used an
SNMP community name not known to said
entity.