Reset Dhcp Server Conflict; Reset Dhcp Server Ip-In-Use - H3C s3600 series Command Manual

# Configure option 100 to be 0x11 and 0x22 for the DHCP global address pools.
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] option 100 hex 11 22

reset dhcp server conflict

Syntax
reset dhcp server conflict { all | ip ip-address }
View
User view
Parameters
ip ip-address: Specifies an IP address, whose conflict statistics will be cleared.
all: Clears all address conflict statistics.
Description
Use the reset dhcp server conflict command to clear address conflict statistics.
Related commands: display dhcp server conflict.
Examples
# Clear all address conflict statistics.
<Sysname> reset dhcp server conflict all

reset dhcp server ip-in-use

Syntax
reset dhcp server ip-in-use { all | interface [ interface-type interface-number ] | ip ip-address | pool
[ pool-name ] }
View
User view
Parameters
all: Clears the dynamic address binding information about all IP addresses.
interface [ interface-type interface-number ]: Clears the dynamic address binding information about a
specified interface address pool. If you do not specify the interface-number argument, this command
clears the dynamic address binding information about all interface address pools.
ip ip-address: Clears the dynamic address binding information about a specified IP address.
pool [ pool-name ]: Clears the dynamic address binding information about a specified address pool.
The pool-name argument, a string of 1 to 35 characters, is the name of an address pool. If you do not
provide this argument, this command clears the dynamic address binding information about all global
address pools.
1-36