Snmp Configuration Commands; Display Snmp-Agent - H3C s3600 series Command Manual

1

SNMP Configuration Commands

The configuration of creating a MIB view with the mask of a MIB subtree is added. See section
snmp-agent mib-view
The configuration of encrypting a plain-text password is added. See section
calculate-password.
The configuration of adding "interface description" and "interface type" into a linkUp/linkDown trap
is added. See section
SNMP Configuration Commands

display snmp-agent

Syntax
display snmp-agent { local-engineid | remote-engineid }
View
Any view
Parameters
local-engineid: Displays the local SNMP entity engine ID.
remote-engineid: Displays all the remote SNMP entity engine IDs. At present, the device does not
support application of the keyword.
Description
Use the display snmp-agent command to display the local SNMP entity engine ID or all the remote
SNMP entity engine IDs.
Each device managed by the NMS needs a unique engine ID to identify an SNMP agent. By default,
each device has a default engine ID. You should ensure that each engine ID is unique within an SNMP
domain.
The creation of username and generation of cipher text password are related to engine ID in SNMPv3.
If you change an engine ID, the username and password configured on the agent with this engine ID
become invalid.
You can use the snmp-agent local-engineid command to configure an engine ID for the device.
for details.
snmp-agent trap ifmib.
1-1
snmp-agent