Igmp Timer Other-Querier-Present - H3C s3600 series Command Manual

Hide thumbs Also See for s3600 series:
Table of Contents

Advertisement

By default, an IGMP querier sends two IGMP group-specific query messages after receiving an IGMP
Leave message.
Related commands: igmp lastmember-queryinterval, display igmp interface.
Examples
# Set the IGMP robustness variable to 3 on VLAN-interface 10.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 10
[Sysname-Vlan-interface10] igmp robust-count 3

igmp timer other-querier-present

Syntax
igmp timer other-querier-present seconds
undo igmp timer other-querier-present
View
Interface view
Parameters
seconds: Other querier present interval in seconds, in the range of 1 to 131,070.
Description
Use the igmp timer other-querier-present command to configure the other querier present interval,
namely the length of time a non-querier waits before it assumes that the current IGMP querier is down.
Use the undo igmp timer other-querier-present command to restore the default value.
By default, the other querier present interval is twice the value of IGMP query interval, that is, 120
seconds if the IGMP query interval has not been manually configured.
On a multi-access network, that is, the same network segment including multiple multicast routers, the
query router (known as querier) is responsible for sending general query messages periodically through
the VLAN interface. If a non-queriers receive no query messages within the other querier present
interval, it assumes that the current querier is down and a new querier election process takes place.
In IGMP version 1, the selection of a querier is determined by the multicast routing protocol. In IGMP
version 2, the router with the lowest IP address on the shared network segment acts as the querier.
Related commands: igmp timer query, display igmp interface.
Examples
# Configure the querier to expire in 300 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 10
[Sysname-Vlan-interface10] igmp timer other-querier-present 300
2-11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents