Display Rip Interface - H3C s3600 series Command Manual

RIP is running
Checkzero is on
Summary is on
Traffic-share-across-interface is off
Period update timer : 30
Timeout timer : 180
Garbage-collection timer : 120
No peer router
Network :
202.38.168.0
Table 3-1 Description on the fields of the display rip command
RIP is running
Checkzero
Default cost
Summary
Preference
Period update timer
Timeout timer
Garbage-collection timer
No peer router
Network
Traffic-share-across-interface

display rip interface

Syntax
display rip interface
View
Any view
Parameters
None
Default cost : 1
Preference : 100
Field
RIP is active.
State of the must be zero field check for RIP-1 packets
on: Enabled
off: Disabled
Default cost for redistributed routes
State of the automatic route summarization function:
on: Enabled
off: Disabled
RIP preference
Length of the period update timer in seconds
Length of the timeout timer in seconds
Length of the garbage-collection timer in seconds
No destination address of a transmission is specified
Network segment on which RIP is enabled
State of load sharing among interfaces:
on: Enabled
off: Disabled
Description
3-3