Multicast Storing-Packet; Multicast-Source-Deny - H3C s3600 series Command Manual

With the multicast packet buffering feature enabled, multicast packets delivered to the CPU are buffered
while the corresponding multicast forwarding entries are being created and forwarded out according to
the multicast forwarding entries after entry creation.
By default, this function is not enabled.
Examples
# Enable the multicast packet buffering feature.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] multicast storing-enable

multicast storing-packet

Syntax
multicast storing-packet packet-number
View
System view
Parameters
packet-number: Maximum number of packets that can be buffered per multicast forwarding entry,
ranging from 10 to 100.
Description
Use the multicast storing-packet command to specify the maximum number of packets that can be
buffered per multicast forwarding entry.
By default, up to 100 packets can be buffered per multicast forwarding entry.
Examples
# Configure to allow a maximum of 50 packets to be buffered per multicast group.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] multicast storing-packet 50

multicast-source-deny

Syntax
multicast-source-deny [ interface interface-list ]
undo multicast-source-deny [ interface interface-list ]
View
System view, Ethernet port view
Parameters
interface interface-list: Enables the multicast source port suppression feature on the specified port or
ports. With the interface-list argument, you can define one or more individual ports (in the form of
1-13