H3C s3600 series Command Manual page 921

Examples
# Add a user named testUser to the SNMPv3 group named testGroup. Set the security mode to
authentication without privacy, the authentication algorithm to md5, and authentication password
authkey.
<Sysname> system-view
[Sysname] snmp-agent group v3 testGroup authentication
[Sysname] snmp-agent usm-user v3 testUser testGroup authentication-mode md5 authkey
On the NMS, set the version to SNMPv3, the username to testUser, the authentication algorithm to
MD5, and the authentication password to authkey, and establish a connection with the device. Then
the NMS can access the MIB objects in the view ViewDefault on the device.
# Add a user named testUser to the SNMPv3 group named testGroup. Set the security mode to
authentication with privacy, the authentication algorithm to md5, the privacy algorithm to des56, the
plain text authentication password to authkey, the plain text privacy password to prikey.
<Sysname> system-view
[Sysname] snmp-agent group v3 testgroup privacy
[Sysname] snmp-agent usm-user v3 testUser testGroup authentication-mode md5 authkey
privacy-mode des56 prikey
On the NMS, set the version to SNMPv3, the username to testUser, the authentication algorithm to
MD5, the authentication password to authkey, the privacy algorithm to DES, and the privacy password
to prikey, and establish a connection with the device. Then the NMS can access the MIB objects in the
view ViewDefault on the device.
# Add a user named testUser to the SNMPv3 group named testGroup in cipher mode (namely, the
authentication and privacy passwords should be in cipher text). Set the security mode to authentication
with privacy, the authentication algorithm to md5, the privacy algorithm to des56, the authentication
password to authkey, and the cipher text privacy password to prikey.
<Sysname> system-view
[Sysname] snmp-agent group v3 testgroup privacy
[Sysname] snmp-agent calculate-password authkey mode md5 local-engineid
The secret key is: 09659EC5A9AE91BA189E5845E1DDE0CC
[Sysname] snmp-agent calculate-password prikey mode md5 local-engineid
The secret key is: 800D7F26E786C4BECE61BF01E0A22705
[Sysname] snmp-agent usm-user v3 testUser testGroup cipher authentication-mode md5
09659EC5A9AE91BA189E5845E1DDE0CC privacy-mode des56 800D7F26E786C4BECE61BF01E0A22705
On the NMS, set the version to SNMPv3, the username to testUser, the authentication algorithm to
MD5, the authentication password to authkey, the privacy algorithm to DES, and the privacy password
to prikey, and establish a connection with the device. Then the NMS can access the MIB objects in the
view ViewDefault on the device.
1-29