Ethernet1/0/3
Ethernet1/0/5
Ethernet1/0/7
Ethernet1/0/9
......
<Omitted>
display poe powersupply
Syntax
display poe powersupply
View
Any view
Parameters
None
Description
Use the display poe powersupply command to view the parameters of the power sourcing equipment
(PSE).
Examples
# Display the PSE parameters.
<Sysname> display poe powersupply
Unit 1
PSE ID
PSE Legacy Detection
PSE Total Power Consumption :0 mW
PSE Available Power
PSE Peak Value
PSE Average Value
PSE Software Version
PSE Hardware Version
PSE CPLD Version
PSE Power-Management mode
Table 1-3 display poe powersupply command output description
PSE ID
PSE Legacy Detection
PSE Total Power Consumption
PSE Available Power
Power Peak Value
0
0
0
0
:0
:disable
:300000 mW
:0 mW
:0 mW
:290
:000
:078
:auto
Field
Ethernet1/0/4
Ethernet1/0/6
Ethernet1/0/8
Ethernet1/0/10
Identification of the PSE
The enabled/disabled status of the nonstandard
PD detection
Total power consumption of the PSE
Available power of the PSE
Peak power value of the PSE
1-4
0
0
0
12400
Description