Qos-Profile - H3C s3600 series Command Manual

Parameters
inbound: Filters the inbound packets.
outbound: Filters the outbound packets.
acl-rule: ACL rules to be applied for traffic classification. This argument can be the combination of
multiple ACLs. For more information about this argument, refer to
Description
Use the packet-filter command to add the packet filtering action to a QoS profile.
Use the undo packet-filter command to remove the packet filtering action from a QoS profile.
Examples
# Add the packet filtering action to the QoS profile named a123 to filter the inbound packets sourced
from MAC address 000F-1FD7-9528.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] acl number 4000
[Sysname-acl-ethernetframe-4000] rule deny source 000f-1fd7-9528 ffff-ffff-ffff
[Sysname-acl-ethernetframe-4000] quit
[Sysname] qos-profile a123
[Sysname-qos-profile-a123] packet-filter inbound link-group 4000

qos-profile

Syntax
qos-profile profile-name
undo qos-profile profile-name
View
System view
Parameters
profile-name: QoS profile name, a case-insensitive string of 1 to 32 characters, starting with an English
letter in the range a to z and A to Z. Note that a QoS profile name cannot be all, interface, user, undo,
or name.
Description
Use the qos-profile command to create a QoS profile and enter QoS profile view. If the QoS profile
already exists, this command leads you to the corresponding QoS profile view.
Use the undo qos-profile command to remove a QoS profile.
To remove or modify a QoS profile already applied to a port, you must remove the QoS profile from the
port first.
If the QoS profile is applied to the port manually, use the undo apply qos-profile command to
remove the QoS profile from the port.
If the QoS profile is applied to the port dynamically, log off the user connected to the port to remove
the QoS profile from the port.
Table 1-4
2-4
and Table 1-5.