Retry Stop-Accounting; Secondary Accounting - H3C s3600 series Command Manual

Related commands:
stop-accounting-buffer.
Examples
# Delete the stop-accounting requests buffered for HWTACACS scheme hwt1.
<Sysname> reset stop-accounting-buffer hwtacacs-scheme hwt1

retry stop-accounting

Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
HWTACACS scheme view
Parameters
retry-times: Maximum number of transmission attempts of a stop-accounting request, ranging from 1 to
300.
Description
Use the retry stop-accounting command to enable the stop-accounting request retransmission
function and set the maximum number of attempts to transmit a stop-accounting request.
Use the undo retry stop-accounting command to restore the default setting.
By default, this function is enabled and the maximum number of transmission attempts is 100.
Related commands:
stop-accounting-buffer.
Examples
# Enable the stop-accounting request retransmission function and set the maximum number of
transmission attempts of a request to 50.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] retry stop-accounting 50

secondary accounting

Syntax
secondary accounting ip-address [ port ]
undo secondary accounting
View
HWTACACS scheme view
stop-accounting-buffer
reset stop-accounting-buffer,
1-64
enable, retry stop-accounting,
hwtacacs
display
scheme, display