Dot1X Timer - H3C s3600 series Command Manual

Sends Trap packets without disconnecting the user, which can be achieved by using the dot1x
supp-proxy-check trap command.
This function needs the cooperation of 802.1x clients and the CAMS server:
Multiple network adapter checking, proxy checking, and IE proxy checking are enabled on the
802.1x client.
The CAMS server is configured to disable the use of multiple network adapters, proxies, and IE
proxy.
By default, proxy checking is disabled on 802.1x client. In this case, if you configure the CAMS server to
disable the use of multiple network adapters, proxies, and IE proxy, it sends messages to the 802.1x
client to ask the latter to disable the use of multiple network adapters, proxies, and IE proxy after the
user passes the authentication.
The 802.1x proxy checking function needs the cooperation of H3C's 802.1x client program.
The proxy checking function takes effect only after the client version checking function is enabled
on the switch (using the dot1x version-check command).
Related commands: display dot1x.
Examples
# Configure to disconnect the users connected to Ethernet 1/0/1 through Ethernet 1/0/8 ports if they are
detected logging in through proxies.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x supp-proxy-check logoff
[Sysname] dot1x supp-proxy-check logoff interface Ethernet 1/0/1 to Ethernet 1/0/8
# Configure the switch to send Trap packets if the users connected to Ethernet 1/0/9 port is detected
logging in through proxies.
[Sysname] dot1x supp-proxy-check trap
[Sysname] dot1x supp-proxy-check trap interface Ethernet 1/0/9

dot1x timer

Syntax
dot1x timer { handshake-period handshake-period-value | quiet-period quiet-period-value |
server-timeout server-timeout-value | supp-timeout supp-timeout-value | tx-period tx-period-value |
ver-period ver-period-value }
undo dot1x timer { handshake-period | quiet-period | server-timeout | supp-timeout | tx-period |
ver-period }
View
System view
1-17