H3C s3600 series Command Manual page 9

hwping
hwtacacs
isp
loopback
luser
manage-vlan
msdp
mst-region
mtlk-group
null
ospf
ospf-area
peer-key-code
peer-public-key
pim
poe-profile
qinq
qos-profile
radius-template
rip
route-policy
shell
smlk-group
system
user-interface
vlan
vlan-interface
command: Command for which the level is to be set.
Description
Use the command-privilege level command to set the level of a specified command in a specified
view.
Use the undo command-privilege view command to restore the default.
Commands fall into four levels: visit (level 0), monitor (level 1), system (level 2), and manage (level 3).
The administrator can change the level of a command as required. For example, the administrator can
CLI view
HWPing test group view
HWTACACS view
ISP domain view
Loopback interface view
Local user view
Management VLAN view
MSDP view, which is supported by only the S3600-EI
series
MST region view
Monitor link group view
NULL interface view
OSPF view, which is supported by only the S3600-EI
series
OSPF area view, which is supported by only the S3600-EI
series
Public key editing view
Public key view
PIM view, which is supported by only the S3600-EI series
PoE profile view
QinQ view
QoS profile view
RADIUS scheme view
RIP view
Routing policy view
User view
Smart link group view
System view
User interface view
VLAN view
VLAN interface view
1-2
Description