H3C s3600 series Command Manual page 528

View
Any view
Parameters
isp-name: Name of an ISP domain, a string of up to 128 characters. This must be the name of an
existing ISP domain.
Description
Use the display domain command to display configuration information about one specific or all ISP
domains.
Related commands: access-limit, domain, scheme, state.
Examples
# Display configuration information about all ISP domains.
<Sysname> display domain
0 Domain = system
State = Active
Scheme = LOCAL
Access-limit = 512
Vlan-assignment-mode = Integer
Domain User Template:
Idle-cut = = Enable Time = 60(min) Flow = 200(byte)
Self-service URL = http://aabbcc.net
Messenger Time Maxlimit = 30(min) span = 10(min)
Default Domain Name: system
Total 1 domain(s).1 listed.
Table 1-2 Description on the fields of the display domain command
Domain
State
Scheme
Access-Limit
Vlan-assignment-mode
Domain User Template
Idle-Cut
Self-service URL
Field
1-11
Description
Domain name
Status of the domain, which can be active or
block.
AAA scheme that the domain uses
Maximum number of local user connections in
the domain
VLAN assignment mode, which can be Integer or
String.
Domain user template settings, that is, attribute
settings for all users in the domain.
Status of the idle-cut function
Self-service URL for password changing