H3C s3600 series Command Manual page 797

# Display the configurations of a remote source mirroring group on your S3600-EI series Ethernet
switch.
<Sysname> display mirroring-group 2
mirroring-group 2:
type: remote-source
status: active
mirroring port:
Ethernet1/0/1
reflector port: Ethernet1/0/2
remote-probe vlan: 10
# Display the configurations of a remote destination mirroring group on your S3600-EI series Ethernet
switch.
<Sysname> display mirroring-group 3
mirroring-group 3:
type: remote-destination
status: active
monitor port: Ethernet1/0/3
remote-probe vlan: 20
Table 1-2 Description on the fields of the display mirroring-group command
Field
mirroring-group
type
status
mirroring port
both/inbound/outbound
monitor port
reflector port
remote-probe vlan
inbound
Port mirroring group number.
Port mirroring group type, which can be local, remote-source, or
remote-destination.
Status of the port mirroring group, which can be active or inactive.
Source port in port mirroring. This field is available only for local
mirroring groups or remote source mirroring groups.
The direction of the mirrored packets, which can be one of the
following:
both: means packets received on and sent from the mirroring port
are mirrored.
Inbound: means packets received on the mirroring port are
mirrored.
outbound: means packets sent from the mirroring port are
mirrored.
Destination port. This field is available only for local mirroring groups
and remote destination mirroring groups.
Reflector port. This field is available only for remote source mirroring
groups.
Remote probe VLAN. This field is available only for remote
source/destination mirroring groups.
1-3
Description